RCB-1W Thrust Washers Trust Bearing Self maza pralne stroje za drsenje

Specifikacija: RCB-1W
Uporabi dele: 1000 kosov
Zmožnost oskrbe: 10000 kosi/mesec
Plačilni pogoji: TT, LC.drugi
Oznake:

Opis


RCB-1W Samomazalni pralni strojPrav.DIN 1494/ISO 3547)

MATERIALNA STRUKTURA

RCB-1W pralni stroj, ki se imenuje pralni stroj
1.Sestava PTFE/Pb, 0.01-0.003mm, antiabrazijski material, ki med obratovanjem tvori plast za mazanje.
2.Bronasta plast prahu, 0.2-0.35mm, ki dodatno okrepi kombinacijo plasti jeklene plošče in PTFE ter hitreje prenese toploto.
Tri.Nizko karbonsko jeklo, nosi visoko prenosno toploto.
4.Bakrov/pločevinasti sloj, proti koroziji.



TEHNIČNI PODATKI


Max Load
Static Load 250N/mm2 friction coefficient 0.03~0.20

Vrtenje nizke hitrosti 140N/mm2 max linear velocity
suho trenje 2m/s

Rotacija: amount in units (real) 60N/mm2
Tekoče mazivo >2m/s
Max PV(Dry Friction)
intermitentno delovanje 3.6N/mm2.m/s Toplotna prevodnost 42W(m.K)-1

Dolgoročna operacija 1.8N/mm2.m/s Koeficient toplotne širitve 11x11-6K
Operacija Temp. -195==Zunanje povezave=*



IMETNIK VLOGE

1. Working under oilless or minim oil state, maintenance free or just need a little maintenance.
2. Resist Abrasion, low coefficient of friction long operating life.
3. Operating in -195℃~+280℃
4. Good mending, low-noise, non-pollution
5. Thin wall, light, which can reduce the machine to small
6. Forming a transferred film during operation to protect shaft
7. Low demand to the shaft even no surface hardness treatment, which lower the cost of the mating components
8. No absorption to water/oil, small coefficient of Thermal emption, good thermal conductivity and size stability
9. The back of the steel strip can be plated with various metal, anti-corrosion
The products now are used in sliding components of different machines, such as auto machines, piston pump, gear pump, textile machine, auto-sides machine, Injection Machine, sports Machine office equipment etc.


Pošlji nam sporočilo.